axial rotation

英 [ˈæksiəl rəʊˈteɪʃn]

美 [ˈæksiəl roʊˈteɪʃn]

网络  绕轴自转; 自转; 轴向转动; 轴向旋转; 绕轴旋转

英英释义

noun

• rotary motion of an object around its own axis
  1. wheels in axial rotation
  Synonym:axial motionroll

双语例句

• Using magnetic fluid dynamics and thermodynamics theory, a study on the results of axial bearing pressure ability of rotation axis magnetic fluid static seals was introduced.
  介绍了利用磁流体动力学、热力学理论，研究旋转轴磁流体静密封轴向承压能力的结果。
• Result: The angular range of motion and neutral zone during flexion, extension, lateral bending and axial rotation at C1-C2 after replacement with artificial atlanto-odontoid joint were proved no significantly difference as compared with intact spine.
  结果：人工寰齿关节置换术后，屈伸、侧屈和旋转运动的中性区以及屈伸和侧屈运动范围较齿状突切除术后明显减小，各运动范围和中性区接近正常状态。
• Under the precondition of incompressible flow, fluid spiral motion in SK static mixer tube was resolved into axial beeline motion and circumferential rotation motion.
  在流体不可压缩的假设前提下，将流体在SK型静态混合器中的螺旋形运动分解成轴向直线运动和环向旋转运动。
• Conclussion: Spine without instability in the anterior and middle columes fixed with TLS increases significantly in flexion, extension, lateral bending and axial rotation stability, especially in rotation.
  结论：在无明显前中柱不稳时，TLS固定后脊柱的前屈、后伸、侧弯和旋转的稳定性明显增加，尤其旋转增加较多；
• Conclusion: Unilateral pedicle screws fixation cannot provide sufficient stability in lateral bending and axial rotation, pedicle screws endure more stress.
  结论：单侧椎弓根螺钉固定不能很好地控制侧屈和旋转载荷，椎弓根螺钉承受较大的应力；
• In the role of air power, the turbine rotation, through the screw into the axial rotation movement, lift the fuse of insurance.
  在空气动力作用下，涡轮旋转，通过螺纹将转动转化成轴向运动，解除引信的保险。
• Spatial Axial Rotation Symmetry of Physical Properties of Crystals
  晶体物理性质的空间轴转动对称性
• Motions of flexion/ extension, lateral bending and axial rotation were produced by six pure moments with maximum of 10.0N · m and measured with stereophotogrammetry.
  对标本施加最大为10.0N.m的力偶矩，使之产生前屈、后伸、左右侧屈和左右轴向旋转运动，并由双平面立体测量的计算机图像分析系统得到节段运动范围。
• There was slight axial rotation of the tibia relative to the femur.
  相对于股骨，胫骨出现轻微轴向转动。
• Roundness error is the variation between the ideal circle and the profile of the cross section, which is perpendicular to the axial line of solid rotation, the value of roundness error affect the rotary precision, the centring precision and the reliability of fastened conjunction directly.
  圆度误差是指在垂直于回转体轴线截面上的轮廓对其理想圆的变动量，误差值的大小直接关系到孔轴配合的回转精度、定心精度以及紧固连接的可靠性。